Software and firmware
Nortek regularly releases new and improved firmware and software. Always ensure that you are running the latest versions. The latest versions can always be found on our software and firmware web page.
For an overview of the software applications and firmware used with the Aquadopp 2, see Software and firmware for the Aquadopp 2
Configuration software
The primary software used to communicate with Aquadopp 2 instruments is Nortek Deployment. The software is available free of charge and can be accessed from our software webpage or downloaded directly from the Microsoft Store.
Firmware
The firmware is the internal software that manages the instrument’s functions and communication with external devices. Nortek continuously releases new firmware versions with upgrades and improvements. To ensure optimal operation, you should always make sure that your instrument is running the latest firmware version.
Note that updating the firmware will format the recorder. Please make sure that you have downloaded all recorded data before updating.
There is one common firmware for all variants of the Aquadopp instrument. The latest version can always be downloaded free of charge from the Nortek software and firmware download page and updated using the Nortek Deployment software. You can also check if your instrument is running the latest version by checking for updates while connected in the Nortek Deployment software.
Connecting to the instrument
To connect the instrument to your computer, utilize the supplied serial cable as well as the USB converter. Make sure the instrument is powered using an external power supply or internal batteries. Open the software Nortek Deployment and navigate to the connection page. In the
Under the help section in the software there is a detailed step by step procedure on how to connect to the Aquadopp 2.
Testing the instruments functionality
We recommend performing a function test when you connect to the instrument for the first time and before every deployment. This allows you to verify that the instrument is functioning correctly and familiarize yourself with the available sensors and the data they provide.
To perform a function test, open the Test instrument tab in Nortek Deployment and select Start function test. This starts measurements at 1 Hz. A comprehensive guide is available under Help articles in the software once the test has started. The same step-by-step procedure is also available in the following article: Function test
Updated