Where to find the latest software and firmware
An application called Vector is used to operate and configure the Gen1 Aquadopp. This software can be installed by downloading an offline installer file. (Nortek | Nortek Software)
Nortek releases new and improved firmware and software on a regular basis. Please always visit our web pages before each deployment to make sure you have the most resent instrument versions. All lates versions of firmware and software can be found on our web site under
Connecting to the instrument
To connect the instrument to your computer for the first time, utilize either the supplied serial cable (default RS422) and USB converter. Make sure the instrument is powered using an external power supply or internal batteries. Open the configuration software and establish a serial connection to the Generation 1 Vector.
A detailed description of communication establishment and function testing can be found here: Establishing a connection
💡 NOTE: While working in the software, we recommend to study the Help section. There, you can find descriptions for each section and parameter selectable as well as useful tips and tricks.
Testing the instruments functionality
After you have received your instrument and established a connection to the configuration software for the first time, we recommend carrying out a Function test. This allows you to ensure the correct functionality of your device and will help you to familiarize yourself with the available sensors and provided variables.
This can be done using the software by starting an online deployment using your preferred configuration. Please refer to the Help section for a detailed walkthrough of this test.
A more comprehensive guide can be found here: Function test
Updated