
Kristin Svingen
- Total activity 43
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 19
Activity overview
Latest activity by Kristin Svingen-
Kristin Svingen created an article,
Which application should I use for my Signature 500 measurements?
When configuring your Signature instrument for deployment you can set it up to use one or several applications. Different applications gives you different types of data, and some of them requires s...
-
Kristin Svingen created an article,
Which application should I use for my Signature 1000 measurements?
When configuring your Signature instrument for deployment you can set it up to use one or several applications. Different applications gives you different types of data, and some of them requires s...
-
Kristin Svingen created an article,
Will starting the instrument in air harm the transducers?
Starting the instrument and pinging in air will harm the instrument in any way. Actually, pinging in air is the way to decide the noise floor of the instrument (as described in the instrument manua...
-
Kristin Svingen created an article,
How can I check which sampling scheme my Signature is set up to?
To get an overview of what data you will be collecting with a given configuration, and how the measurements are distributed in time, you can use the command READCFG in the terminal window after upl...
-
Kristin Svingen created an article,
How do the Signature Deployment applications decide the sampling scheme?
When you are configuring your Signature instrument in the Signature Deployment software, the second step in the deployment wizard is "Application". This is where you choose what type of measurement...
-
Kristin Svingen commented,
Official comment Hi Marcel, Thank you for posting to our forum, and I am sorry to hear you have problems with the download speed. Unfortunately, since the Vector and HR instruments produce a significant amount of ...
-
Kristin Svingen created an article,
How can I change the communication protocol from RS232 to RS422 on my Signature?
The Signature instruments can use both RS232 and RS422 protocol for communication. When the instrument is delivered to you it is by default set to communicate over RS232, so if you are going to com...
-
Kristin Svingen created an article,
How can I increase my profiling range?
The range of your measurements are mainly govern by fixed parameters like the transducer frequency (you can read more about which factors that affect your range in this FAQ). There are however a fe...
-
Kristin Svingen created an article,
How can I get my battery to last longer?
The table below gives an overview of which measures you can take to get your battery to last longer, and what consequences these choices will have on your deployment. Measure Consequence Use...
-
Kristin Svingen created an article,
How can I improve the precision of my measurements?
When you are configuring your instrument for a deployment, your settings will affect the precision of the measurements. The precision is the theoretically estimated standard deviation of the measur...