Oddrun Christin Myklebust
- Total activity 26
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 18
Activity overview
Latest activity by Oddrun Christin Myklebust-
Oddrun Christin Myklebust commented,
Official comment Hi Maria, thanks for posting on our fourm. Normally wouldn’t the age of the instrument give such errors. Usually checksum errors are due to noise on the cable, loose / bad connectors, too low baud ...
-
Oddrun Christin Myklebust commented,
Official comment Hi Jeremy, thanks for posting on our forum. The coordinate system illustrated on the Vector on page 15 in the Comprehensive manual has the y-axis pointing the wrong way - it should be pointing to t...
-
Oddrun Christin Myklebust created an article,
Quick Guide – Signature VM
DescriptionProvides you with the basic information you need to get your instrument up and running as quickly as possible. InstrumentsSignature VM Date11.05.2020 Download
-
Oddrun Christin Myklebust created a post,
Questions following up from "Turbulent parameterization with Signature ADCPs"
Hi, Thanks for the webinar today, I learned a lot from the overview provided by Jim Thompson and Atle Lorhmann. I'm wondering if there is a good reference for getting Reynolds stresses from a No...
-
Oddrun Christin Myklebust created a post,
Echo Sounder Data Format Description
This is a post based on a support request sent in to support@nortekgroup.com I’m working with a Signature 100 with echo sounder, and are getting a coding error when I try to read the header file; e...
-
Oddrun Christin Myklebust created a post,
Why can I not see velocity precision estimate in the deployment software for pulse coherent or HR measurements?
For pulse coherent measurements the precision is highly dependent on the correlation value which is not known up front. You could use a model where you do the calculation at for example 90% corre...
-
Oddrun Christin Myklebust created an article,
How to calculate current speed and direction from ADCP velocity components
The raw velocity measurement is a vector in the direction along each of the beams, which is referred to as beam coordinates. Beam coordinates can be converted to a Cartesian coordinate system (XYZ)...
-
Oddrun Christin Myklebust commented,
Official comment Thanks for addding a post reagarding this matter. We are looking at this and would appreciate any input others might have. The raw .ad2cp datafile is highly appreciated since this is the only way f...