Operational Guidelines

These guidelines give an overview of considerations that should be made before making a deployment, focusing on the practical aspects. To help you ensure a successful deployment, these guidelines can be used to identify the most appropriate deployment method, choose the right instrument, prepare and carry out the deployment as well as the necessary maintenance of an instrument.

Initial deployment planning

This section guides you through the key considerations for planning a successful deployment, including site conditions, environmental factors, and expected performance. It also helps you select the most suitable Nortek instrument based on your measurement goals and constraints.

Forces acting on a deployment

This section discusses the individual forces acting on the deployment, as it is crucial to achieve the right balance among them. Properly accounting for these forces ensures stability, minimizes unwanted movement, and enhances the accuracy of measurements.

Mounting alternatives

Nortek products can operate either as stand-alone units powered internally or as online systems that stream data continuously to shore. This section explains the different mounting methods such as buoys, moorings, and bottom mounts, which can be used to deploy them.

Equipment

Selecting the right equipment when designing a mooring system is essential for ensuring stability, durability, and accurate data collection. Each component—whether buoys, mooring lines, anchors, or shackles—must be carefully chosen based on environmental conditions, expected loads, and measurement objectives.

Instrument preparation

This section covers all essential steps to get a Nortek instrument ready for deployment, from power setup and the establishing of a connection, to function testing and calibration.

Maintenance

This section outlines the essential maintenance tasks needed to keep Nortek instruments operating reliably, including cleaning, sealing, cable handling, and preventing bio-fouling. It also covers routine procedures such as performing post-deployment checks, replacing desiccant bags, securing screws and caring for connectors.